Characteristics: Pallet Racking System. Description: SUPERBO 4-5-6 series are interchangeable with the SUPERBUILD and UNIBUILD heavy duty pallet racking series and have been designed to satisfy all requirements of medium to heavy duty pallet storage. SUPERBO series are available in three different frame load options, up to 14 tons. The SUPERBO series are well known for their utmost performance in terms of resistance against torsional deflection, thanks to the closed box section of the uprights. Thanks to the rigidity of the frame, SUPERBO provides significant resistance against rupture and deformation and good performance in case of accidental impact. The frames are made from prime quality, certified, high tensile, hot dipped galvanised steels (procedure SENDZIMIR), thus ensuring a high level of durability. All structural components are made from high tensile steels, certified according to EN 10204 3.1. The frames are assembled using threaded rivets and screws, allowing for an easy and quick assembly and providing utmost rigidity of the connection between uprights and frame bracing components. The beams are profiled sections with quadruple flange thickness at points of maximum stress for high loading capability. A channel running along the top face of the beam provides a lip within which a variety of components may be inserted, such as modular shelf panels, secondary beams, drum cradles a.o. Beams with riveted, double sided beam connectors distinguish themselves by an optimised upright/beam connection, featuring utmost mechanical precision regarding beam length and position of the connector. A wide range of load capacity options is available to provide the best possible beam load bearing options for each application, thus ensuring the very best cost efficiency. As far as the beam surface is concerned, the following options are available: a) entirely zinc coated beams, featuring zinc coating at the inside and outside of the bream profiles for the best cost&quality ratio; b) zinc coated and additionally powder coated beams for utmost protection; c) powder coated beams made from pickled steel. All SUPERBO beams can be adjusted in height at intervals of 50 mm, thus facilitating the best use of available space. The design of the various components is the result of rigorous technical testing and the highly specialised knowledge developed over years of experience in the field of metal processing. This experience has enabled us to offer innovative products of the highest quality, highly competitively priced, and to provide a highly technical solution to the most important storage problems, such as rapid assembly, stability, low cost and load bearing capacity. © Copyright 2013 All rights reserved. Click thumbnail to enlarge Click thumbnail to enlarge